Human Anti-Chloride Intracellular Channel Protein 1 Antibody (Anti-CLIC1) (Competitive EIA) ELISA Kit

Mfr.No.

AEC390Hu

Sensitivity

12.1pg/mL

Detection Range

31.2-2,000pg/mL

Reactivity

Human

Assay Duration

2h, 30min

Assay Type

Competitive Inhibition

Sample Volume

100 ul(Please refer to the manual for the specific data.)

Description

This assay has high sensitivity and excellent specificity for detection of Anti-Chloride Intracellular Channel Protein 1 Antibody (Anti-CLIC1).
No significant cross-reactivity or interference between Anti-Chloride Intracellular Channel Protein 1 Antibody (Anti-CLIC1) and analogues was observed.

Alternative Names

G6; NCC27; p64CLCP; hRNCC; Chloride channel ABP; Nuclear chloride ion channel 27; Regulatory nuclear chloride ion channel protein

Detection Method

Colormetric

Kit Components

Reagents	Quantity	Reagents	Quantity
Pre-coated, ready to use 96-well strip plate	1	Plate sealer for 96 wells	4
Standard	2	Standard Diluent	1×20mL
Detection Reagent A	1×120µL	Assay Diluent A	1×12mL
TMB Substrate	1×9mL	Stop Solution	1×6mL
Wash Buffer (30 × concentrate)	1×20mL	Instruction manual	1

Recovery

Matrices listed below were spiked with certain level of Anti-Chloride Intracellular Channel Protein 1 Antibody (Anti-CLIC1) and the recovery rates were calculated by comparing the measured value to the expected amount of Anti-Chloride Intracellular Channel Protein 1 Antibody (Anti-CLIC1) in samples.

Matrix	Recovery range (%)	Average(%)
serum(n=5)	84-101	97
EDTA plasma(n=5)	88-101	93
heparin plasma(n=5)	97-105	101

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Anti-Chloride Intracellular Channel Protein 1 Antibody (Anti-CLIC1) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample	1:2	1:4	1:8	1:16
serum(n=5)	98-105%	93-103%	89-98%	91-99%
EDTA plasma(n=5)	86-94%	95-102%	88-102%	96-104%
heparin plasma(n=5)	80-96%	86-95%	99-105%	92-105%

Features

Detects protein (antigen)

Species

Human

Sample Type

Cell lysates, Cell culture supernates, Serum, Tissue homogenates, Plasma, Other biological fluids

Precautions

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Anti-Chloride Intracellular Channel Protein 1 Antibody (Anti-CLIC1) were tested 20 times on one plate, respectively. Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Anti-Chloride Intracellular Channel Protein 1 Antibody (Anti-CLIC1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: C<10%
Inter-Assay: C<12%

Notes

The microtiter plate provided in this kit has been pre-coated with an antigen. Standards or samples are then added to the appropriate microtiter plate wells with a Horseradish Peroxidase (HRP)-conjugated secondary antibody. After TMB substrate solution is added, those wells that contain Anti-Chloride Intracellular Channel Protein 1 Antibody (Anti-CLIC1) will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Anti-Chloride Intracellular Channel Protein 1 Antibody (Anti-CLIC1) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Usage Notes

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 5 times;
5. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
6. Add 50µL Stop Solution. Read at 450nm immediately.

Gene ID	1192
UniProt ID	O00299
Tissue Specificity	Reactive with Human CLIC1 / Chloride Intracellular Channel Protein 1

Applications	ELISA
Research Area	Signal transduction

Storage	4°C for 1 month/ -20°C for long-term(within shelf life)
Shelf Life	one year

Have you used this product?

Rate it now..!!

SKU	Supplier No.	Size	Your price
BHE10109115	AEC390Hu	96T*1	$900	Add to Cart
BHE10109115	AEC390Hu	96T*5	$4050	Add to Cart
BHE10109115	AEC390Hu	96T*10	$7650	Add to Cart

ELISA Kit for Anti-Chloride Intracellular Channel Protein 1 Antibody (Anti-CLIC1) (Human)

Contact us to order

Tel

Email

Contact us to order

Tel

Email

Reviews of ELISA Kit for Anti-Chloride Intracellular Channel Protein 1 Antibody (Anti-CLIC1) (Human)

Rate it now..!!