Mouse Matrix metalloproteinase 2 antibody (MMP2-Ab) ELISA Kit

SKU:BHE13710047
Overview
Click light‑blue chips for details
Mouse Matrix metalloproteinase 2 antibody (MMP2-Ab) ELISA Kit quantifies Mouse Matrix metalloproteinase 2 antibody (MMP2-Ab) in serum, plasma, and cell culture supernatants using a sandwich ELISA format. Includes all components for standard-curve based quantification.
Assay Format Sandwich ELISA
Detection Method Colorimetric
Compatible Sample Types Cell Culture Supernatant, Serum, Plasma
Species Reactivity Mouse
Assay Time Multiple steps standard sandwich ELISA assay with a working time of 3-5 hours. It depends on the experience of the operation person.
Available Options
Size (4) - 48 T, 96 T, 96 T×5, 96 T×50
Options selector
Catalog no. Size
KTE71555-48T 48 T
KTE71555-96T 96 T
KTE71555-96TX5 96 T×5
KTE71555-96TX50 96 T×50
Field Specification
Alternative Names MMP2-Ab; antibody for CLG4; CLG4A; MMP-II; MONA; TBE-1; collagenase type IV-A; matrix metalloproteinase 2; matrix metalloproteinase-II; neutrophil gelatinase matrix metallopeptidase 2 (gelatinase A; 72kDa gelatinase; 72kDa type IV collagenase) (MMP2); Gelatinase A; Gel A
Assay Time
  • Multiple steps standard sandwich ELISA assay with a working time of 3-5 hours. It depends on the experience of the operation person.
Assay Type
  • Sandwich ELISA (quantitative)
Detection Method
  • Colorimetric
Product Type
  • Sandwich ELISA Kit
Reactivity
  • Mouse
Sample Type(s) Cell culture supernatants, Serum, Plasma, Other biological fluids
Shipping Gel pack with blue ice.
Storage The unopened kit should be stored at 2 - 8°C. After opening, please store refer to protocols.

Features & Benefits

Mouse Matrix metalloproteinase 2 antibody (MMP2-Ab) ELISA Kit has high sensitivity and excellent specificity for detection of Mouse MMP2-Ab. No significant cross-reactivity or interference between Mouse MMP2-Ab and analogues was observed.

Background

MMP2 is a member of the matrix metalloproteinase (MMP) gene family, that are zinc-dependent enzymes capable of cleaving components of the extracellular matrix and molecules involved in signal transduction. The protein encoded by this gene is a gelatinase A, type IV collagenase, that contains three fibronectin type II repeats in its catalytic site that allow binding of denatured type IV and V collagen and elastin. Unlike most MMP family members, activation of this protein can occur on the cell membrane. This enzyme can be activated extracellularly by proteases, or, intracellulary by its S-glutathiolation with no requirement for proteolytical removal of the pro-domain. This protein is thought to be involved in multiple pathways including roles in the nervous system, endometrial menstrual breakdown, regulation of vascularization, and metastasis. Mutations in this gene have been associated with Winchester syndrome and Nodulosis-Arthropathy-Osteolysis (NAO) syndrome. Alternative splicing results in multiple transcript variants encoding different isoforms.

What sample types are compatible with this ELISA kit?

This Matrix metalloproteinase 2 antibody (MMP2-Ab) ELISA kit is validated for use with Cell culture supernatants, Serum, Plasma, Other biological fluids. Samples should be collected, processed, and stored correctly to preserve analyte integrity — avoid repeated freeze-thaw cycles and centrifuge to remove particulates before use. Dilute samples exceeding the kit's detection range using the supplied assay diluent. Hemolytic, icteric, or lipemic samples may affect assay performance and should be tested with caution.

What is the assay format and detection principle?

This is a sandwich ELISA kit employing an HRP (horseradish peroxidase)-conjugated secondary antibody paired with a TMB (3,3′,5,5′-tetramethylbenzidine) colorimetric substrate. In the sandwich format, the target analyte Matrix metalloproteinase 2 antibody (MMP2-Ab) captured on the microplate surface is detected by the conjugated antibody, generating a colorimetric signal proportional to analyte concentration. The reaction is stopped and absorbance measured at 450 nm on a standard microplate reader.

How long does the complete assay take?

The complete protocol, from sample addition to final plate reading, requires approximately 3–5 hours. This includes two incubation periods (analyte binding and detection antibody steps), intermediate wash cycles to remove unbound material, 15–30 minutes of TMB substrate development, and final stop-solution addition before absorbance reading. Exact timing will vary with experience level and the number of samples processed in parallel.

What equipment and instruments are required?

Required equipment: (1) a microplate spectrophotometer capable of reading absorbance at 450 nm (reference wavelength 540–570 nm recommended for background correction); (2) precision single-channel or multichannel pipettes; (3) a plate washer or multichannel aspirator; (4) a microcentrifuge for sample clarification; and (5) a 37°C incubator or stable room-temperature environment. No fluorescence or luminescence reader is required — standard colorimetric plate readers are fully compatible with this kit.

Can this kit detect Matrix metalloproteinase 2 antibody (MMP2-Ab) in species not listed in the specification?

This ELISA kit is formally validated for Mouse. Cross-reactivity with species not listed in the specification has not been independently characterized. Variability in protein sequence homology across species means that performance in unlisted species cannot be guaranteed without additional validation. For cross-species detection requirements or non-standard sample matrices, please contact BioHippo support or refer to the manufacturer's technical team for guidance.

Can't Find What You're Looking For? We can help you source the best match or customize an ELISA solution for your study. Options may include alternative target synonyms, different species reactivity, sample type/matrix compatibility (serum/plasma/lysate/supernatant), assay format (sandwich/competitive), sensitivity/range, detection chemistry (colorimetric/fluorescent/chemiluminescent), plate format (pre-coated/uncoated, strips vs full plate), and bulk or custom packaging. Click Talk to a Scientist to submit a request form, email us at support@biohippo.com, or explore our Research Services for additional support. Our team will be in contact with you shortly.

Get a Quote

Please use this form for bulk quantity requests or customized products.

Contact Information

Product Information

Supplier Ads Slides show

Add dynamic ads with slider