| Field | Specification |
|---|---|
| Activity | |
| Alternative Names | Core protein;Matrix protein;NS1;NS2A;Flavivirin protease NS2B regulatory subunit;Non-structural protein 2B;Flavivirin protease NS3 catalytic subunit;Non-structural protein 3;NS4A;NS4B;Non-structural protein 5 |
| Conjugate | |
| Endotoxin Level | |
| Expression System | |
| Form | Liquid or Lyophilized powder |
| Molecular Weight | |
| Product Type | |
| Protein Length | |
| Purity | |
| Reconstitution | |
| Species | |
| Storage | |
| Target | |
| UniProt # |
Overview
Recombinant Tick-borne encephalitis virus Far Eastern subtype Genome polyprotein, partial is a recombinant protein preparation derived from Tick-borne encephalitis virus Far Eastern subtype (strain Sofjin) (SOFV) (Sofjin virus). It is commonly used as a defined reagent for assay development, binding studies, and analytical controls where consistent protein specifications are required.
Key elements and design rationale
- Expressed region: 281-727aa.
- Expression system: Baculovirus (may influence folding and post-translational modifications).
- Tag/format: C-terminal 10xHis-tagged; Liquid or Lyophilized powder.
- Expected size: 54.4 kDa (as provided).
- Purity: Greater than 85% as determined by SDS-PAGE.
Region choice, expression system, and tag/format can influence folding, post-translational modifications, and interaction behavior in downstream assays.
Biological background
[Capsid protein C]: Plays a role in virus budding by binding to the cell membrane and gathering the viral RNA into a nucleocapsid that forms the core of a mature virus particle. During virus entry, may induce genome penetration into the host cytoplasm after hemifusion induced by the surface proteins. Can migrate to the cell nucleus where it modulates host functions. ; [Capsid protein C]: Inhibits RNA silencing by interfering with host Dicer. ; [Peptide pr]: Prevents premature fusion activity of envelope proteins in trans-Golgi by binding to envelope protein E at pH6.0. After virion release in extracellular space, gets dissociated from E dimers. ; [Protein prM]: Acts as a chaperone for envelope protein E during intracellular virion assembly by masking and inactivating envelope protein E fusion peptide. prM is the only viral peptide matured by host furin in the trans-Golgi network probably to avoid catastrophic activation of the viral fusion activity in acidic Golgi compartment prior to virion release. prM-E cleavage is inefficient, and many virions are only partially matured. These uncleaved prM would play a role in immune evasion. ; [Small envelope protein M]: May play a role in virus budding. Exerts cytotoxic effects by activating a mitochondrial apoptotic pathway through M ectodomain. May display a viroporin activity. ; [Envelope protein E]: Binds to host cell surface receptor and mediates fusion between viral and cellular membranes. Envelope protein is synthesized in the endoplasmic reticulum in the form of heterodimer with protein prM. They play a role in virion budding in the ER, and the newly formed immature particle is covered with 60 spikes composed of heterodimer between precursor prM and envelope protein E. The virion is transported to the Golgi apparatus where the low pH causes dissociation of PrM-E heterodimers and formation of E homodimers. prM-E cleavage is inefficient, and many virions are only partially matured. These uncleaved prM would play a role in immune evasion. ; [Non-structural protein 1]: Involved in immune evasion, pathogenesis and viral replication. Once cleaved off the polyprotein, is targeted to three destinations: the viral replication cycle, the plasma membrane and the extracellular compartment. Essential for viral replication. Required for formation of the replication complex and recruitment of other non-structural proteins to the ER-derived membrane structures. Excreted as a hexameric lipoparticle that plays a role against host immune response. Antagonizing the complement function. Binds to the host macrophages and dendritic cells. Inhibits signal transduction originating from Toll-like receptor 3 (TLR3). ; [Non-structural protein 2A]: Component of the viral RNA replication complex that functions in virion assembly and antagonizes the host immune response. ; [Serine protease subunit NS2B]: Required cofactor for the serine protease function of NS3. May have membrane-destabilizing activity and form viroporins. ; [Serine protease NS3]: Displays three enzymatic activities: serine protease, NTPase and RNA helicase. NS3 serine protease, in association with NS2B, performs its autocleavage and cleaves the polyprotein at dibasic sites in the cytoplasm: C-prM, NS2A-NS2B, NS2B-NS3, NS3-NS4A, NS4A-2K and NS4B-NS5. NS3 RNA helicase binds RNA and unwinds dsRNA in the 3' to 5' direction. ; [Non-structural protein 4A]: Regulates the ATPase activity of the NS3 helicase activity. NS4A allows NS3 helicase to conserve energy during unwinding. ; [Peptide 2k]: Functions as a signal peptide for NS4B and is required for the interferon antagonism activity of the latter. ; [Non-structural protein 4B]: Induces the formation of ER-derived membrane vesicles where the viral replication takes place. Inhibits interferon (IFN)-induced host STAT1 phosphorylation and nuclear translocation, thereby preventing the establishment of cellular antiviral state by blocking the IFN-alpha/beta pathway. Inhibits STAT2 translocation in the nucleus after IFN-alpha treatment. ; [RNA-directed RNA polymerase NS5]: Replicates the viral (+) and (-) genome, and performs the capping of genomes in the cytoplasm. NS5 methylates viral RNA cap at guanine N-7 and ribose 2'-O positions. Besides its role in RNA genome replication, also prevents the establishment of cellular antiviral state by blocking the interferon-alpha/beta (IFN-alpha/beta) signaling pathway. Inhibits host TYK2 and STAT2 phosphorylation, thereby preventing activation of JAK-STAT signaling pathway.
Research relevance and current trends
- Antigen design and domain selection to better capture neutralizing versus non-neutralizing antibody responses.
- High-throughput serology and antibody screening using standardized antigens and plate-based formats.
- Integrating binding kinetics with epitope mapping to support variant-aware immunology studies.
Common research applications
- Coat plates with TBEV-FE-PP antigen for ELISA antibody titration (serum/plasma).
- Screen anti-TBEV-FE-PP antibodies by indirect ELISA and immunoblot readouts.
- Map antigenic epitopes using TBEV-FE-PP fragments/domains (in vitro binding assays).
- Develop antigen-capture assays using TBEV-FE-PP as a standard (spike-in controls).
Interpret results in the context of the biological system, assay format, and any known domain/isoform constraints for the target.
Notes for experimental interpretation
- Antigenic proteins may contain immunodominant regions; domain choice can affect assay readouts and cross-reactivity.
- Include relevant negative controls (e.g., unrelated antigens) and dilution series to support interpretation of binding signals.
What is protein expression and purification?
Why is there no/low protein expression?
b. Rare codons. You should optimize codons, use strains supplementing rare codons, induce at lower temperature or grow in poor media.
c. Protein toxicity. You should use promoters with tighter regulation or lower plasmid copy number. Use pLysS/pLysE bearing strains in T7-based systems or strains that are better for the expression of toxic proteins. Start induction at high OD and shorten induction time. Add glucose when using expression vectors containing lac-based promoters.
How to avoid inclusion bodies and improve soluble expression?
b. Incorrect disulfide bond formation. You should add fusion partners, including thioredoxin, DsbA, DsbC. Clone in a vector containing secretion signal peptide to cell periplasm. Use gamiB (DE3)strains with oxidative cytoplasmic environment. Lower inducer concentration and induction temperature.
c. Incorrect folding. You should use a fusion partner. Co-express with molecular chaperones. Use strains with cold-adapted chaperones. Supplement media with chemical chaperones and cofactors. Reduce the inducer concentration and add fresh media. Induce for a shorter time at low temperature.
Why is the molecular weight of protein smaller than the predicted?
b. Imbalanced translation process of fusion protein. You should change another fusion tag or move fusion tag to C-terminal. You should induce for a shorter time at low temperature or change to poor media.
c. Protein degradation. You should replace specific protease sites. Use protease deficient strains. Induce at high OD. You should induce for a shorter time at low temperature or use protease inhibitors when breaking cells.
Why is the actual band size different from the predicted?
b. Post-translational cleavage. Many proteins are synthesized as pro-proteins, and then cleaved to give the active form.
c. Splice variants. Alternative splicing may create different sized proteins from the same gene.
d. Relative charge. The composition of amino acids have different relative charge which will affect the electrophoretic mobility.
e. Multimers such as dimerisation of a protein. This is usually prevented in reducing conditions, although strong interactions can result in the appearance of higher bands.
f. Protein structure such as disulfide bond, protein secondary structure or protein 3D structure formation.
g. Hydrophobic proteins, such as transmembrane proteins, may have difficulties in migrating into the gel, and thus resulting in different multi-banded patterns.
How to express a protein with bioactivity? Why is the protein inactive?
a. Low solubility of the protein. You should fuse desired protein to a fusion partners and lower temperature.
b. Lack of essential post translational modification. You should change another expression system.
c. Incomplete folding. You should use a fusion partner and use strains with cold-adapted chaperones. Co-express with molecular chaperones at lower temperature. Monitor disulfide bond formation and allow further folding in vitro.
d. Mutations in cDNA. You should sequence plasmid before and after induction or use a recA− strain to ensure plasmid stability. Transform E. coli before each expression round.
Why are our protein products almost invisible in pipes?
Tips: Before opening the lid, we recommend to centrifuge in a small centrifuge for 20-30 seconds firstly to ensure that the contents are on the bottom of the tube. Our quality control steps ensure that the amount of protein contained in each tube is accurate, although sometimes you can’t see the protein powder, but the protein content in the tube is still very accurate.
How is the protein purified? Is the purity guaranteed?
Although we guarantee a minimum purity standard of >85%, some of the proteins we prepared have a purity of 95% or even 97%.
How should I reconstitute and store the products?
As for short-term storage or usage, please use sterile deionized water to completely reconstitute proteins to 0.1-1.0 mg/mL. Aliquot after 10-15 minutes if needed and store at 4℃.
As for long-term storage, the cytokines or recombinant proteins are recommended to add 5-50% of glycerol (final concentration) and aliquot for long-term storage at -20℃/-80℃. Our default final concentration of glycerol is 50%. Customers could use it as reference.
What types of tags do you use for fusion?
What is the impact of a given tag type and any potential biological activity of the protein?
Can you remove the endotoxin?
Can you offer aseptic manufacture processing?
How to determine species cross-reactivity of cytokines?
b. Many mouse cytokines may also have effect on human cells, however, the activity may be lower than the corresponding human cytokines.
c. One of the few human cytokines will be more active than corresponding mouse cytokines when acting on mouse cells, such as IL-7.
d. Interferon, GM-CSF, IL-3 and IL-4 and other cytokines are species-specific and almost have no activity on non-homologous cells.
e. In contrast, fibroblast growth factor (FGF) and neurotrophin are highly conserved and both have good activity on cells of different species.
What is the general preservative? Which kind of preservative do you usually add?
What is the general protectant? What kind of protectant do you usually add?
Can’t Find What You’re Looking For? We can help you source the best match or customize a recombinant protein solution for your study. Options may include species (human/mouse/rat), protein region/domain (full-length vs fragment), tag or label (His/GST/FLAG/biotin/fluorescent), expression system (E. coli/HEK293/insect), purity grade, formulation (buffer, carrier-free, glycerol-free), activity/functional validation (binding or enzymatic assays), endotoxin level (low-endotoxin for cell-based work), mutants/variants (point mutations, isoforms), and bulk or custom packaging. Click Talk to a Scientist to submit a request form, email us at support@biohippo.com, or explore our Research Services for additional support. Our team will be in contact with you shortly.
Research budgets are tight — we get it. That's why we've put together a fresh round of exclusive promotions designed to help you stock up on the reagents, kits, and consumables your lab depends on, without stretching your budget.
🔬 What's on offer right now:
10% Off Pre-Designed siRNA Sets — use code SIRNA10
20% Off Transmembrane Proteins — use code TM20
$50 Off All ELISA Kits — auto-applied at checkout (code ELISA50)
50% Off Lab Consumables + Free Shipping on orders $500+
15% Off Proteins from Trusted Suppliers — use code PROTEIN15
$99 Pipette Filler Promotion Package (reg. $236)
Save 10% on your first order of any R&D grade DENARASE® with code DENARASE10 at checkout.
