| Field | Specification |
|---|---|
| Product Format | Frozen |
| Product Type | |
| Shipping | |
| Storage |
Overview
This cell line stably expresses the wild-type form of alpha-synuclein (α-synuclein) under tetracycline regulatable expression (tet-off). Therefore, it is useful for studies investigating the role of α-synuclein in Lewy body formation and the development of related neurodegenerative diseases.
Key elements and design rationale
- Model identity: Human Wild-Type Alpha-Synuclein H4 Cell Line is supplied as an engineered cell line derived from Human brain.
- Growth properties: Adherent, fibroblast-like with large cytoplasm; elongated and spindly when too confluent
- Growth conditions: Use of PriCoat™ T25 Flasks (G299) or Applied Cell Extracellular Matrix (G422) is recommended for cell adhesion to the culture vessels. PriGrow C Medium (TM100) + 10% FBS(Regular*) + 200ug/ml Hygromycin B (G265) + 200ug/ml G418 (G262) + 1 ug/ml tetracycline* + 1% Penicillin/Streptomycin Solution (G255), 37.0°C, 5% CO₂. *Expression of the construct is tetracycline regulated - TET-OFF* **Cell growth and proliferation is better when seeded at higher densities; do not seed too sparsely** *Do not heat-inactivate
- Engineering / immortalization: Luciferase reporter expression.
- Product format: Frozen, BSL-2
This cell-based model is generally used in neurobiology, differentiation, and cell signaling studies. Donor/background information is available for contextual interpretation.
Biological background
This cell line is also the control cell line for the α-synuclein bioluminescent/fluorescent-protein complementation pair cell lines mentioned below.Complete list of cell lines from this panel:Cat. T3427 - Human Wild-Type Alpha-Synuclein H4 Cell LineCat. T3428 - Full-length Gaussia Luciferase H4 Stable Cell Line (HgLuc) Cat. T3429 - α-Synuclein-Luciferase Bioluminescent Stable H4 Cell Line (H4 S1S2)Cat. T3430 - α-Synuclein-Venus Fluorescent Stable H4 Cell Line (H4 V1S/SV2)Cat. T3441 - Full-length Venus Expressing H4 Stable Cell Line (HgLuc) Cat. T3458 - Mutant Alpha-Synuclein (Ala53Thr) Stable H4 Cell LineCat. T3459 - Mutant Alpha-Synuclein (Ala30Pro) Stable H4 Cell Line Donor/background information provided for this product: Male, White, 37, Neuroglioma.
Research relevance and current trends
- Engineered cell lines are widely used for reporter-based readouts, perturbation studies, and assay optimization in reproducible culture systems.
- Reporter or transgene-bearing models are often compared with matched parental or control cells to interpret signal changes in context.
- Expression trends are typically evaluated alongside passage number, selection pressure, and baseline growth behavior.
Common research applications
- Neurobiology-focused studies of growth state, differentiation-associated morphology, and cell signaling changes in culture.
- Cell-based assays that compare experimental perturbations across defined media and substrate conditions.
- Phenotype tracking using morphology, marker expression, or reporter output where applicable.
Changes in morphology, growth rate, viability, or reporter signal are typically interpreted together with passage history, culture matrix, and the specified growth conditions for the model.
Notes for experimental interpretation
- Morphology, doubling behavior, and reporter or marker output can shift with passage number, substrate choice, and medium composition; these variables should be recorded alongside experimental readouts.
- Matched controls such as parental cells, untreated cultures, or parallel cultures maintained under identical conditions help distinguish background effects from biology of interest.
Culture and product details
- Growth Conditions: Use of PriCoat™ T25 Flasks (G299) or Applied Cell Extracellular Matrix (G422) is recommended for cell adhesion to the culture vessels. PriGrow C Medium (TM100) + 10% FBS(Regular*) + 200ug/ml Hygromycin B (G265) + 200ug/ml G418 (G262) + 1 ug/ml tetracycline* + 1% Penicillin/Streptomycin Solution (G255), 37.0°C, 5% CO₂. *Expression of the construct is tetracycline regulated - TET-OFF* **Cell growth and proliferation is better when seeded at higher densities; do not seed too sparsely** *Do not heat-inactivate
- Seeding Density (cells/cm²): 22,000 - 32,000
- Thaw cells quickly in a 37°C water bath while agitating gently (maximum 2 minutes). The vial cap should be kept above the water level to minimize the risk of contamination.
- Decontaminate the vial by spraying and wiping the exterior of the vial with 70% ethanol. From this point onwards, all operations should be strictly carried out inside a biological safety cabinet using aseptic conditions.
- Transfer the cell suspension into a 15ml sterile conical tube containing 5ml of pre-warmed, complete growth media. Centrifuge cells at 100xg for 5 minutes.
- Aspirate the supernatant without disturbing the cell pellet. Re-suspend the cell pellet in the recommended pre-warmed, complete growth media and dispense into a T25 culture flask.
- Incubate the cells at the recommended conditions.
- Aspirate the culture media, and add 2-3ml of pre-warmed 0.25% Trypsin-EDTA to the culture vessel.
- Observe the cells under a microscope to confirm detachment (typically within 2-10 minutes). Cells that are difficult to detach can be put in 37°C, for several minutes to facilitate detachment.
- Neutralize Trypsin-EDTA by adding an equal volume of the complete growth media into the culture vessel.
- Transfer the culture suspension into a sterile centrifuge tube, and centrifuge at 100xg for 5 minutes. The actual centrifuge duration and speed may vary depending on the cell type.
- Aspirate the supernatant, and re-suspend the pellet with pre-warmed fresh complete growth media. Add appropriate aliquots of the cell suspension to new culture vessels, as desired.
- Incubate the cells at the recommended conditions.
How should I handle live cells once I receive them?
https://www.abmgood.com/immortalized-cells-documents.html
Following these guidelines will help ensure optimal cell viability and performance.
Why are these cells classified as biosafety level II?
What is your warranty or return policy?
Please refer to the following link for full information:
https://www.abmgood.com/terms
For additional questions, our Order team is happy to assist and can be reached at order@abmgood.com.
How many times can cells divide?
Primary cells have a limited lifespan and will undergo a finite number of population doublings before entering senescence. The exact number varies by cell type and culture conditions.
Immortalized cell lines are capable of extended or indefinite proliferation under proper culture conditions, although growth characteristics may vary between lines.
Do I need Applied Cell Extracellular Matrix (G422) if I am using PriCoat™ flasks?
Cell line sourcing and selection (species, tissue, and disease model matching) · Stable cell line engineering (overexpression, knockdown, knockout via CRISPR/Cas9, shRNA, sgRNA) · Reporter gene integration (GFP, RFP, luciferase, fluorescent/bioluminescent constructs) · Genome editing and knockin (point mutations, tagged endogenous proteins, conditional alleles) · Inducible expression systems (Tet-On/Off and regulatable constructs) · Drug resistance marker selection (puromycin, G418, hygromycin, and others) · Custom growth and media optimisation for specific assay requirements · Scale-up production for high-throughput screening campaigns · Authentication and QC services (STR profiling, mycoplasma testing, viability assessment). Talk to a Scientist or contact support@biohippo.com.
Research budgets are tight — we get it. That's why we've put together a fresh round of exclusive promotions designed to help you stock up on the reagents, kits, and consumables your lab depends on, without stretching your budget.
🔬 What's on offer right now:
10% Off Pre-Designed siRNA Sets
20% Off Transmembrane Proteins
50% Off Lab Consumables + Free Shipping
$99 Pipette Filler Promotion Package
BlasTaq 2X qPCR MasterMix - 50% OFF Limited Time Offer
DENARASE® Endonuclease — 10% Off One Order
