| Field | Specification |
|---|---|
| Mfr No | |
| Assay Type | |
| Detection Range | |
| Product Type | |
| Sample Type(s) | serum, plasma |
| Sensitivity | |
| Storage | |
| Target |
Assay Principle
Tribioscience’s Fast ACTH ELISA is designed to quantitatively detect ACTH levels in serum, plasma, and other biological samples with our FAST proprietary approaches to combine samples and detections into a one-step. It makes the assay simple, easy, accurate, and fast. The total operating time can be finished within 2 hours, not need 4-5 hours (Fig. 1). The detection range is from 7 to 500 pg/mL. The ACTH levels of samples are parallel to the standard curves obtained using the kit standards linearly. Therefore, the kit can be used to determine relative mass values for ATCH.
Typical Data This standard curve(R 2 =0.999) is provided for demonstration only. A standard curve should be generated for each set of samples assayed. Fig. 3 is an example of typical Data.
Sensitivity The minimum detectable dose (MOD) of ACTH is typically 5 pg/ml. The Intra-assay CV and the Inter-assay CV are ˂10%.
Fast Adrenocorticotropic Hormone/ACTH ELISA Kit is a Solid-phase sandwich ELISA for the quantitative determination of Adrenocorticotropic Hormone/ACTH. The microplate is pre-coated with a capture antibody specific to the target. Target present in the sample or standard binds the immobilized antibody, is detected with a biotinylated detection antibody and streptavidin-HRP, and quantified colorimetrically against a standard curve.
Kit Components
The kit provides a pre-coated microplate, target standard for standard-curve generation, detection reagents (detection antibody and enzyme conjugate), wash buffer, substrate, and stop solution. Refer to the product datasheet for the complete component list and quantities.
Performance Data
| Target | Adrenocorticotropic Hormone/ACTH |
|---|---|
| Sample Type | serum, plasma |
| Assay Type | Sandwich |
| Test Principle | Solid-phase sandwich ELISA |
| Sensitivity | 5 pg/mL |
| Detection Range | 7–500 pg/mL |
| Precision | Intra-assay CV 10% |
| Standard | Recombinant Adrenocorticotropic Hormone/ACTH |
| Specificity | This assay recognizes natural and recombinant human ACTH. |
| Storage | Store the unopened kit at 2-8°C. | Components: Return unused wells to the foil pouch. Reseal along the entire edge of the zip-seal. May be stored for up to 1 month at 2-8°C.; Aliquot and store at -20°C for up to 1 month in a manual defrost freezer. Avoid repeated freeze-thaw cycles.; May be stored for up to 3 months at 2-8°C. |
✓ Quality tested for reproducibility and lot-to-lot consistency
Safety & Handling
This kit is validated for serum, plasma. Other matrices may require additional in-lab validation.
This assay has a sensitivity of 5 pg/mL and a detection range of 7–500 pg/mL. Samples reading outside the range should be diluted or concentrated.
The kit provides a pre-coated microplate, target standard for standard-curve generation, detection reagents (detection antibody and enzyme conjugate), wash buffer, substrate, and stop solution. See the datasheet for the full component list and quantities.
A standard microplate reader capable of measuring absorbance at 450 nm is required for this sandwich ELISA.
Customization & Add-ons: Need this ELISA kit tailored to your workflow? We can help with bulk or custom pack sizes, species or analyte variants, matched antibody pairs and standards, alternate plate formats (48- or 96-well, strip-well), and assay development or custom ELISA solutions for targets not in our catalog. Click Talk to a Scientist to submit a request, email us at support@biohippo.com, or explore our Research Services — our team will follow up with feasibility details and next steps.
