| Field | Specification |
|---|---|
| Mfr No | |
| Assay Time | |
| Assay Type | |
| Detection Range | |
| Product Type | |
| Sample Type(s) | cell culture supernatant, serum, plasma |
| Sensitivity | |
| Storage | |
| Target |
Assay Principle
The Fast Human LH ELISA is a solid phase ELISA designed to measure human LH levels in cell culture supernatants, serum, and plasma. The main feature is that the kit uses our novel proprietary approaches to combine samples and detections into a one-step instead of the complicated traditional methods. It makes the assay simple, easy, accurate and fast. The measurement can be finished in 1 hour, with no need for 4-5 hours (Fig. 1). The detection range is from 156 to 10000 pg/mL. The levels of human LH samples are parallel to the standard curves obtained using the kit standards linearly. These results indicate that this kit can be used to determine relative mass values for natural human LH protein.
Typical Data This standard curve (R 2 =0.9925) is provided for demonstration only. A standard curve should be generated for each set of samples assayed. Fig. 3 is an example of typical Data.
Sensitivity The minimum detectable dose (MOD) of human LH is typically 140 pg/mL.
Fast Luteinizing Hormoneα/LH-α ELISA Kit is a Solid-phase sandwich ELISA for the quantitative determination of Luteinizing Hormoneα/LH-α. The microplate is pre-coated with a capture antibody specific to the target. Target present in the sample or standard binds the immobilized antibody, is detected with a biotinylated detection antibody and streptavidin-HRP, and quantified colorimetrically against a standard curve.
Kit Components
The kit provides a pre-coated microplate, target standard for standard-curve generation, detection reagents (detection antibody and enzyme conjugate), wash buffer, substrate, and stop solution. Refer to the product datasheet for the complete component list and quantities.
Performance Data
| Target | Luteinizing Hormoneα/LH-α |
|---|---|
| Sample Type | cell culture supernatant, serum, plasma |
| Assay Type | Sandwich |
| Test Principle | Solid-phase sandwich ELISA |
| Sensitivity | 140 pg/mL |
| Detection Range | 156–10000 pg/mL |
| Assay Time | 1 hour |
| Precision | Intra-assay CV 10%; Inter-assay CV 12% |
| Standard | Recombinant Luteinizing Hormoneα/LH-α |
| Specificity | This assay recognizes natural and recombinant human LH. |
| Storage | Store the unopened kit at 2-8°C. |
✓ Quality tested for reproducibility and lot-to-lot consistency
Safety & Handling
This kit is validated for cell culture supernatant, serum, plasma. Other matrices may require additional in-lab validation.
This assay has a sensitivity of 140 pg/mL and a detection range of 156–10000 pg/mL. Samples reading outside the range should be diluted or concentrated.
The total assay time is approximately 1 hour from sample addition to plate reading.
The kit provides a pre-coated microplate, target standard for standard-curve generation, detection reagents (detection antibody and enzyme conjugate), wash buffer, substrate, and stop solution. See the datasheet for the full component list and quantities.
A standard microplate reader capable of measuring absorbance at 450 nm is required for this sandwich ELISA.
Customization & Add-ons: Need this ELISA kit tailored to your workflow? We can help with bulk or custom pack sizes, species or analyte variants, matched antibody pairs and standards, alternate plate formats (48- or 96-well, strip-well), and assay development or custom ELISA solutions for targets not in our catalog. Click Talk to a Scientist to submit a request, email us at support@biohippo.com, or explore our Research Services — our team will follow up with feasibility details and next steps.
