| Field | Specification |
|---|---|
| Mfr No | |
| Alternative Names | SLC7A7; LPI; Y+LAT1; MOP-2; Monocyte amino acid permease 2; Y+L Amino Acid Transporter 1; Solute Carrier Family 7 Member 7,Cationic Amino Acid Transporter,y+ System |
| Detection Range | |
| Gene ID | |
| Product Type | |
| Sample Type(s) | tissue homogenates, cell lysates or other biological fluids. |
| Sensitivity | |
| Species | |
| UniProt # |
Assay Principle
L-Type Amino Acid Transporter 1 (L-Type Amino Acid Transporter 1) is a biomarker protein expressed in human tissues and biological fluids. It is also referred to as SLC7A7; LPI; Y+LAT1. Dysregulation of L-Type Amino Acid Transporter 1 has been implicated in cellular signaling and fundamental cell biology, making it a relevant biomarker for investigational studies.
Quantitative measurement of L-Type Amino Acid Transporter 1 enables researchers to characterize its abundance in Tissue Homogenate, Cell Lysate and correlate levels with experimental conditions. Studies investigating L-Type Amino Acid Transporter 1 have contributed to the understanding of cell signaling pathways, disease pathogenesis, and therapeutic target validation.
This sandwich ELISA kit provides a validated, reproducible format for L-Type Amino Acid Transporter 1 quantification across a defined standard curve range of 0.312-20ng/mL. The assay supports experimental workflows in Cell Biology research.
Kit Components
Each kit contains sufficient reagents for one 96-well plate (approximately 40 samples in duplicate with standard curve):
Pre-coated 96-well microplate (capture antibody), HRP-conjugated detection antibody, recombinant standard protein, sample/standard diluent, concentrated wash buffer, TMB substrate solution, stop solution, and product manual.
Validated Lot Colorimetric ReadoutPerformance Data
| Assay Type | Sandwich ELISA |
|---|---|
| Detection Range | 0.312-20ng/mL |
| Sensitivity (LLOD) | 0.114ng/mL |
| Validated Sample Types | Tissue Homogenate, Cell Lysate |
| Detection Method | Colorimetric (450 nm / 540–570 nm reference) |
| Plate Format | 96-well microplate |
| UniProt Accession | Q9UM01 |
| NCBI Gene ID | 9056 |
| Shelf Life | Traditional: 12 months | Ready-to-use: 16 months |
Assay Procedure Summary
Add samples and standards to pre-coated capture antibody wells and incubate. Wash, add HRP-conjugated detection antibody, and incubate. Wash again, add TMB substrate, and stop the reaction. Read absorbance at 450 nm (reference 540–570 nm). Interpolate sample concentrations from the standard curve using a 4-parameter logistic (4-PL) fit.
Pre-warm all kit components to room temperature (18–25 °C) for 30 minutes before starting. Run all samples in duplicate. Centrifuge samples at ≥1,000 × g before use to remove particulates.
Safety & Intended Use
Intended UseResearch Use Only (RUO)VendorDLdevelopCatalog No.DL-y+LAT1-Hu, DLR-y+LAT1-HuSpeciesHumanUniProtQ9UM01
This kit is validated for tissue homogenates and cell lysates. Centrifuge samples at ≥1,000 × g for 15 min to remove particulates. Avoid hemolyzed, lipemic, or heat-inactivated samples. Pre-dilute samples within the linear range before committing full plates.
Minimum detectable concentration: 0.114ng/mL. Quantitative standard curve range: 0.312-20ng/mL. Samples above the upper limit must be diluted; near-lower-limit samples require duplicate measurement.
A typical sandwich ELISA protocol for this kit requires 3.5–5 hours. Pre-warm reagents to room temperature (18–25 °C) for at least 30 minutes before starting and prepare standard dilutions while the capture plate equilibrates.
A standard microplate spectrophotometer set to 450 nm (reference: 540–570 nm) is required. An automated plate washer reduces wash-step variability. Calibrate and warm up your reader before measuring. Blank using the zero-standard or buffer-only well before constructing the standard curve.
Store the unopened kit at 2–8 °C until the expiry date. Shelf life: Traditional: 12 months | Ready-to-use: 16 months from date of manufacture. Reconstituted standard is stable at 4 °C for ≤1 week; prepare fresh for critical experiments.
Looking for a custom format, bulk quantity, or specialized formulation? We offer flexible sourcing options. Contact us to discuss your specific requirements.
