| Field | Specification |
|---|---|
| Mfr No | |
| Assay Time | |
| Assay Type | |
| Detection Range | |
| Product Type | |
| Sample Type(s) | serum, plasma |
| Sensitivity | |
| Species | |
| Storage | |
| Target |
Assay Principle
The Tribio® Human MBL ELISA is a solid phase ELISA designed to measure human MBL levels in serum and plasma. The main feature is that the kit uses our novel proprietary approaches to combine samples and detection into a one-step instead of the complicated traditional methods. It makes the assay simple, easy, accurate, and fast. The measurement can be finished in 2 hours, with no need for 5-6 hours (Fig. 1). The measurement can be finished within 2 hours, not need 4-5 hours. The detection range is from 0.125 to 20 ng/mL. The levels of human MBL samples are parallel to the standard curves obtained using the kit standards linearly. These results indicate that this kit can be used to determine relative mass values for natural human MBL protein levels.
Typical Data This standard curve is provided for demonstration only as Fig.3. A standard curve should be generated for each set of samples assayed.
Sensitivity The minimum detectable dose (MOD) of human MBL is typically 100 pg/ml.
Human MBL Oligomer ELISA Kit is a Solid-phase sandwich ELISA for the quantitative determination of MBL Oligomer. The microplate is pre-coated with a capture antibody specific to the target. Target present in the sample or standard binds the immobilized antibody, is detected with a biotinylated detection antibody and streptavidin-HRP, and quantified colorimetrically against a standard curve.
Kit Components
The kit provides a pre-coated microplate, target standard for standard-curve generation, detection reagents (detection antibody and enzyme conjugate), wash buffer, substrate, and stop solution. Refer to the product datasheet for the complete component list and quantities.
Performance Data
| Target | MBL Oligomer |
|---|---|
| Species | Human |
| Sample Type | serum, plasma |
| Assay Type | Sandwich |
| Test Principle | Solid-phase sandwich ELISA |
| Sensitivity | 100 pg/mL |
| Detection Range | 0.125–20 ng/mL |
| Assay Time | 2 hours |
| Standard | Recombinant Human MBL Oligomer |
| Specificity | This assay recognizes natural and recombinant human MBL. |
| Storage | Store the unopened kit at 2-8°C. | Components: Return unused wells to the foil pouch. Reseal along the entire edge of the zip-seal. May be stored for up to 1 month at 2-8°C.; Aliquot and store at -20°C for up to 1 month in a manual defrost freezer. Avoid repeated freeze-thaw cycles.; May be stored for up to 1 month at 2-8°C. |
✓ Quality tested for reproducibility and lot-to-lot consistency
Safety & Handling
This kit is validated for serum, plasma. Other matrices may require additional in-lab validation.
This assay has a sensitivity of 100 pg/mL and a detection range of 0.125–20 ng/mL. Samples reading outside the range should be diluted or concentrated.
The total assay time is approximately 2 hours from sample addition to plate reading.
The kit provides a pre-coated microplate, target standard for standard-curve generation, detection reagents (detection antibody and enzyme conjugate), wash buffer, substrate, and stop solution. See the datasheet for the full component list and quantities.
A standard microplate reader capable of measuring absorbance at 450 nm is required for this sandwich ELISA.
Customization & Add-ons: Need this ELISA kit tailored to your workflow? We can help with bulk or custom pack sizes, species or analyte variants, matched antibody pairs and standards, alternate plate formats (48- or 96-well, strip-well), and assay development or custom ELISA solutions for targets not in our catalog. Click Talk to a Scientist to submit a request, email us at support@biohippo.com, or explore our Research Services — our team will follow up with feasibility details and next steps.
