| Field | Specification |
|---|---|
| Species | |
| Applications | |
| Sterility | Negative for mycoplasma, bacteria and yeasts |
| Tissue | |
| Sex | |
| Growth properties | |
| Biosafety level | |
| Product format | Cryopreserved vial, 1 × 10^6 cells |
| Storage | |
| Shipping | |
| Catalog no. (Mfr.) | |
| Main SKU |
Product Description
Primary Cells · Skin CellsHuman Sebocytes are isolated from human sebaceous glands. Every vial comes from a single donor. Each vial contains 1 × 10^6 viable cells counted before cryopreservation. As primary cells (not immortalized), they have a limited lifespan in culture and cannot be subcultured indefinitely.
Specifications
| Species | Human (Homo sapiens) |
|---|---|
| Tissue | Sebaceous gland (skin) |
| Cell type | Skin Human Sebocytes from single donor |
| Isolation | From sebaceous glands |
| Growth properties | Adherent |
| Morphology | Variable |
| Passage | Lot-specific (see Certificate of Analysis) |
| Minimum population doublings | 15 (do not exceed passage 6) |
| Cell number | 1 × 10^6 viable cells per vial before cryopreservation |
| Viability | Minimum 70% when thawed from cryopreservation |
| Cryopreservation medium | 95% serum-free cryopreservation medium + 5% DMSO |
| Donor information | Age, sex, body site and skin phototype are lot-specific (see Certificate of Analysis) |
| Recommended medium | Sebocyte Growth and Differentiation Medium (BHM22100005) |
| Storage | Liquid nitrogen (-175 °C or lower) |
| Shipping | Dry ice (-80 °C or lower) |
Quality Control
Negative for HIV, HBV, HCVNegative for mycoplasma, bacteria and yeastsBiosafety level 1
Handling & Storage
- Check that the shipping container and vials are intact and undamaged on delivery.
- If the cells are not used immediately, place the vials at -150 °C or below upon delivery.
- Thawing of the cell products may induce up to 30% cell loss depending on the operator's experience and thawing procedures.
- Handle cells derived from human samples with standard laboratory protection to avoid operator exposure.
Research use only. Cells and tissues are intended for research use only and must not be used for human or animal trials or for diagnostics. The original tissues were obtained with the informed consent of the donor.
Recommended medium: Sebocyte Growth and Differentiation Medium (BHM22100005).
Note: seeding of sebocytes (post thawing or when subculturing) is promoted by supplementation with human fibronectin
Thawing and culturing frozen cells
Option 1: Fibronectin pre-coated flask can be used to support sebocyte adhesion
- Add 0.10-0.12 mL per cm² of Sebocyte Growth and Differentiation Medium (BHM22100005) in a fibronectin coated tissue culture flask. (Recommended: 9 mL in a T75 flask or 18 mL in a T175 flask).
- Add 13 mL of PBS solution to a 15 mL conical tube, and warm in a water bath to 37 °C.
- Start thawing cryovial by swirling in a water bath at 37 °C. As soon as the content has thawed, start step 4.
- Once almost completely thawed, add the cell suspension to the warmed PBS in sterile conditions.
- Spin the tube at 300 g for 10 minutes at 20 °C to pellet the cells.
- Resuspend the cells in the appropriate volume of recommended medium.
- Seed the cells in the culture vessel at a concentration of 2,500 to 3,000 cells per cm².
- Incubate at 37 °C, 5% CO2 atmosphere, 95% humidity.
- After 24 hours of incubation, change the medium to remove any debris.
- Continue to incubate and change the medium every 3-4 days.
Option 2: Make up the appropriate volume of seeding medium (recommended ratio: 21µL of 0.1% fibronectin solution => recommended Merck Sigma Aldrich Cat N°#F0895) per mL of Sebocyte Growth and Differentiation Medium (BHM22100005)
- Add 0.10-0.12 mL per cm² of seeding medium in a tissue culture flask. (Recommended: 9 mL in a T75 flask or 18 mL in a T175 flask).
- Add 13 mL of PBS solution to a 15 mL conical tube, and warm in a water bath to 37 °C.
- Thaw cryovial by swirling in a water bath at 37 °C. As soon as the content has thawed, start step 4.
- Once thawed, add the cell suspension to the warmed PBS in sterile conditions.
- Spin the tube at 300 g for 10 minutes at 20 °C to pellet the cells.
- Resuspend the cells in the appropriate volume of recommended medium.
- Seed the cells in the culture vessel at a concentration of 2,500 to 3,000 cells per cm².
- Incubate at 37 °C, 5% CO2 atmosphere, 95% humidity.
- After 24 hours of incubation, change the medium to remove any debris.
- Continue to incubate and change the medium every 3-4 days.
Subculturing
- Start sub-culturing when cells reached 90%-100% confluence.
- Preheat TrypLE (non-toxic for cell - trypsin substitute) and recommended medium.
- Remove the medium from the flask.
- Wash the cells quickly with PBS without Ca2+ Mg2+.
- Add 0.06 mL per cm² of TrypLE for 5 min at 37 °C in the incubator.
- Remove the cells from the flask by pipetting several times and wash the flask with recommended medium for remaining cells.
- Centrifuge the cells in recommended medium at 300 g for 10 minutes to pellet the cells.
- Remove the supernatant and resuspend the pellet in recommended medium.
Option 1: Fibronectin pre-coated flask can be used to support sebocyte adhesion
- Add 0.10-0.12 mL per cm² of Sebocyte Growth and Differentiation Medium (BHM22100005) in a fibronectin coated tissue culture flask. (Recommended: 9 mL in a T75 flask or 18 mL in a T175 flask). Seed the cells in the culture vessel at a concentration of 2,500 to 3,000 cells per cm².
- Incubate at 37 °C, 5% CO2 atmosphere, 95% humidity.
- After 24 hours of incubation, change half of the medium to remove any debris.
- Continue to incubate and change the medium every 3-4 days.
Option 2: Make up the appropriate volume of seeding medium (recommended ratio: 21µL of 0.1% fibronectin solution (recommended Merck Sigma Aldrich Cat N°#F0895) per mL of Sebocyte Growth and Differentiation Medium (BHM22100005)
- Add 0.10-0.12 mL per cm² of seeding medium in a tissue culture flask. (Recommended: 9 mL in a T75 flask or 18 mL in a T175 flask) Seed the cells in the culture vessel at a concentration of 2,500 to 3,000 cells per cm².
- Incubate at 37 °C, 5% CO2 atmosphere, 95% humidity.
- After 24 hours of incubation, change half of the medium to remove any debris.
- Continue to incubate and change the medium every 3-4 days.
Customization & Add-ons: Looking for cells from a specific donor or lot? The following options can be requested for CTIBIOTECH primary and patient-derived cells:
- Donor selection: donor criteria such as age, sex, ethnicity, skin phototype or body site, depending on the cell type and available lots
- Lot selection: review lot-specific data (Certificate of Analysis, and donor or clinical data for tumor-derived cells) and choose a lot before ordering
- Custom cell numbers: vial sizes other than the standard size for selected products
- Matched growth media: the recommended culture medium, where available, can be ordered together with the cells
Special donor requirements may extend the lead time. Click Talk to a Scientist to submit a request or email support@biohippo.com; our team will follow up with availability and a quote.